MAX5945EVKIT Maxim Integrated, MAX5945EVKIT Datasheet - Page 12

• Manufacturer Part Number: MAX5945EVKIT
• Description: Power Management IC Development Tools Evaluation Kit/Evaluation System for the MAX5945
• Manufacturer: Maxim Integrated
• Series: MAX5945r

MAX5945 Evaluation Kit/Evaluation System
The Locate Slave button is used to search for a
MAX5945 located on the I
interface whose address has been changed while the
software was running. The valid MAX5945 slave
address range is 0x40 through 0x5F. The MAX5945
does respond to global address 0x60, although the EV
kit hardware cannot be set to this specific address.
When the Record checkbox is checked, the program
automatically enters the record macro state and dis-
ables certain buttons and menus. Choosing the
Commands|Clear Script Input menu clears any script
presently in the Macro script input edit box field.
Comment lines in a macro script begin with a # / ; ‘ *
character. A line of script is entered by choosing the
appropriate Slave Address, Register Address and
entering the desired Hexadecimal Data or Binary Data
in the combo boxes. Then selecting the Write Byte or
Figure 1. The MAX5945 Evaluation Software’s Main Window for Controlling the Software State, Configuring the MAX5945 Registers
Using the Macro Engine and Displaying All the Registers In Binary and Hexadecimal Format
12
______________________________________________________________________________________
Record Macro State Controls
2
C-compliant 2-wire serial
Read Byte button enters the script into the Macro input
edit box field. For time delays in a macro, choose the
desired delay time from the combo box on the right
side of the Delay button and then select the Delay but-
ton. The macro must be saved before exiting the record
macro state, using the File|Save Macro menu. The
macro file must have an smb file extension name.
To edit a previously saved macro, open the macro
using the File|Open Macro menu and make the
desired edits. The modified file must be saved prior to
exiting the record macro state. Uncheck the Record
checkbox to exit the record macro state. Additionally, a
macro can be created or edited using a plain text edi-
tor in “Text Mode.” The file must be saved with an smb
extension.