MT46H16M16LFBF-5 IT:H Micron Technology Inc, MT46H16M16LFBF-5 IT:H Datasheet - Page 34

• Manufacturer Part Number: MT46H16M16LFBF-5 IT:H
• Description: IC DDR SDRAM 256MBIT 60VFBGA
• Manufacturer: Micron Technology Inc
• Type: DDR SDRAMr

Specifications of MT46H16M16LFBF-5 IT:H

• Format - Memory: RAM
• Memory Type: Mobile DDR SDRAM
• Memory Size: 256M (16Mx16)
• Speed: 200MHz
• Interface: Parallel
• Voltage - Supply: 1.7 V ~ 1.95 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 60-VFBGA
• Organization: 16Mx16
• Density: 256Mb
• Address Bus: 15b
• Access Time (max): 6.5/5ns
• Maximum Clock Rate: 200MHz
• Operating Supply Voltage (typ): 1.8V
• Package Type: VFBGA
• Operating Temp Range: -40C to 85C
• Operating Supply Voltage (max): 1.95V
• Operating Supply Voltage (min): 1.7V
• Supply Current: 140mA
• Pin Count: 60
• Mounting: Surface Mount
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DESELECT
NO OPERATION
LOAD MODE REGISTER
ACTIVE
PDF: 09005aef834bf85b
256mb_mobile_ddr_sdram_t36n.pdf - Rev. H 11/09 EN
Notes:
Table 14: DM Operation Truth Table
The DESELECT function (CS# HIGH) prevents new commands from being executed by
the device. Operations already in progress are not affected.
The NO OPERATION (NOP) command is used to instruct the selected device to perform
a NOP. This prevents unwanted commands from being registered during idle or wait
states. Operations already in progress are not affected.
The mode registers are loaded via inputs A[0:n]. See mode register descriptions in Stand-
ard Mode Register (page 49) and Extended Mode Register (page 53). The LOAD
MODE REGISTER command can only be issued when all banks are idle, and a subse-
quent executable command cannot be issued until
The ACTIVE command is used to activate a row in a particular bank for a subsequent
access. The values on the BA0 and BA1 inputs select the bank, and the address provided
on inputs A[0:n] selects the row. This row remains active for accesses until a PRE-
CHARGE command is issued to that bank. A PRECHARGE command must be issued
before opening a different row in the same bank.
Name (Function)
Write enable
Write inhibit
1. Used to mask write data; provided coincident with the corresponding data.
2. All states and sequences not shown are reserved and/or illegal.
34
256Mb: x16, x32 Mobile LPDDR SDRAM
DM
H
L
Micron Technology, Inc. reserves the right to change products or specifications without notice.
t
MRD is met.
Valid
DQ
X
©2008 Micron Technology, Inc. All rights reserved.
Commands
Notes
1, 2
1, 2