MCP1630RD-SALED Microchip Technology, MCP1630RD-SALED Datasheet - Page 16

• Manufacturer Part Number: MCP1630RD-SALED
• Description: Power Management IC Development Tools MCP1630 Sepic Automotive LED Drvr
• Manufacturer: Microchip Technology
• Type: DC/DC Converters, Regulators & Controllersr

Specifications of MCP1630RD-SALED

• Rohs: yes
• Product: Reference Designs
• Tool Is For Evaluation Of: MCP1630
• Input Voltage: 9 V to 16 V
• Output Voltage: 55 V
• Output Current: 350 mA

MCP1630 Sepic Automotive LED Driver Reference Design
2.5
DS51955A-page 16
PROGRAMMING THE PIC12F683 MICROCONTROLLER
The firmware package provides the source and .hex files for the LED driver.
The board is factory programmed with the LED driver firmware. UVLO, OVLO
thresholds and dimming steps can be modified. The source code is commented
extensively and helps the user to define the board.
This firmware was developed using MPLAB
and HI-TECH C
Header J1 provides in-system circuit programming. Follow the next steps to program
the board:
1. Connect the PICkit™ 3 to the USB port.
2. Connect the PICkit 3 device to the board at J1 pin. Ensure the polarity is correctly
3. Open the project00323.prj file with MPLAB Integrated Development
4. Select Programmer from the menu bar, click Select Programmer and choose
5. Return to the Programmer menu and select Settings. From the Properties
6. On the warning message that appears click, OK.
7. From the Programmer menu, choose Program. Check the Output window if the
The board is now ready to operate.
applied.
Environment.
PICkit 3 from the submenu list.
window that appears, click the Power tab.
Set the voltage to 5V and select the “Power target circuit from PICkit 3” check
box. Press Apply.
programming was performed without errors.
®
for the PIC10/12/16 MCU Family (v9.7).
®
Integrated Development Environment
© 2011 Microchip Technology Inc.