450-0019 LS Research, 450-0019 Datasheet - Page 17

• Manufacturer Part Number: 450-0019
• Description: Zigbee / 802.15.4 Modules SiFLEX02 Module RF Castellation
• Manufacturer: LS Research

Specifications of 450-0019

• Rohs: yes
• Frequency Band: 900 MHz
• Line Of Sight Range: 2 miles
• Data Rate: 1 Mbps
• Sensitivity: - 102 dBm
• Operating Supply Voltage: 2 V to 3.45 V
• Supply Current Transmitting: 285 mA
• Supply Current Receiving: 30 mA
• Output Power: 250 mW
• Antenna Connector Type: Off Board
• Maximum Operating Temperature: + 85 C
• Dimensions: 1.63 in x 0.9 in x 0.2 in
• Minimum Operating Temperature: - 40 C
• Factory Pack Quantity: 50

DEVELOPMENT TOOLS
AVR Studio
AVR Studio® is an Integrated Development
Environment (IDE) for writing and debugging
AVR® applications. AVR Studio includes an
assembler, simulator, and in-circuit debugger.
AVR Studio is the Integrated Development
Environment (IDE) developed by Atmel for
writing and debugging Atmel AVR applications.
WinAVR
WinAVR is a suite of executable, open source
software development tools for the Atmel AVR
series of RISC microprocessors hosted on the
Windows platform. It includes the GNU GCC
compiler for C/C++.
WinAVR contains all the tools for developing on
AVR family microcontrollers from Atmel. This
includes avr-gcc (compiler), avrdude
(programmer), avr-gdb (debugger), and more.
AVR JTAGICE mkII
Custom firmware development can be done on
the SiFLEX02 module using development tools
available through Atmel. Shown in Figure 12, a
JTAGICE mkII interface is required. It plugs
into the ModFLEX™ Development Board, and
can easily be adapted to other hardware. See
the Atmel website for more information and
ordering options.
The information in this document is subject to change without notice.
330-0009-R3.1
Copyright © 2009-2012 LS Research, LLC
AVRISP mkII
Another option for in-circuit programming is the
AVRISP mkII from Atmel, Figure 13. The
AVRISP mkII combined with AVR Studio® can
program new AVR 8-bit RISC microcontrollers
with ISP Interface.
IAR Embedded Workbench for Atmel
AVR
Another option is IAR Embedded Workbench
for Atmel AVR. IAR Embedded Workbench for
AVR is an integrated development environment
for building and debugging embedded
applications. Visit the IAR Systems website for
additional information.
SiFLEX02 TRANSCEIVER MODULE
Figure 12 JTAGICE mkII
Figure 13 AVRISP mkII
DATASHEET
Page 17 of 40