MAX34461EVKIT# Maxim Integrated, MAX34461EVKIT# Datasheet - Page 42

• Manufacturer Part Number: MAX34461EVKIT#
• Description: Power Management IC Development Tools MAX34461 Eval Kit
• Manufacturer: Maxim Integrated
• Type: Voltage Detectorsr

Specifications of MAX34461EVKIT#

• Rohs: yes
• Product: Evaluation Kits
• Tool Is For Evaluation Of: MAX34461
• Input Voltage: 3 V to 3.6 V
• Output Voltage: 3 V to 3.6 V
• Interface Type: USB
• Part # Aliases: 90-34461#EVK

The READ_TEMPERATURE_1 command returns the tem-
perature returned from the temperature sensor. READ_
TEMPERATURE_1 returns 7FFFh if the sensor is faulty and
0000h if the sensor is disabled. READ_TEMPERATURE_1
is measured and updated once per second. The 2 data
bytes are in DIRECT format.
The PMBUS_REVISION command returns the revision of
the PMBus specification to which the device is compliant.
The command has 1 data byte. Bits [7:4] indicate the
revision of PMBus specification Part I to which the device
is compliant. Bits [3:0] indicate the revision of PMBus
specification Part II to which the device is compliant. This
command is read-only. The PMBUS_REVISION value
returned is always 11h, which indicates that the device is
compliant with Part I Rev 1.1 and Part II Rev 1.1.
The MFR_ID command returns the text (ISO/IEC 8859-1)
character of the manufacturer’s (Maxim) identification.
The default MFR_ID value is 4Dh (M). This command is
read-only.
The MFR_MODEL command returns the text (ISO/IEC
8859-1) character of the device model number. The
default MFR_MODEL value is 56h (V). This command is
read-only.
Maxim Integrated
PMBus 16-Channel Voltage Monitor and Sequencer
READ_TEMPERATURE_1 (8Dh)
PMBUS_REVISION (98h)
MFR_MODEL (9Ah)
MFR_ID (99h)
The MFR_REVISION command returns two text (ISO/
IEC 8859-1) characters that contain the device revision
numbers for hardware (upper byte) and firmware (lower
byte). This command is read-only.
The MFR_LOCATION command loads the device with
text (ISO/IEC 8859-1) characters that identify the facility
that manufactures the power supply. The maximum num-
ber of characters is 8. This data is written to internal flash
using the STORE_DEFAULT_ALL command. The factory
default text string value is 10101010.
The MFR_DATE command loads the device with text
(ISO/IEC 8859-1) characters that identify the date of
manufacture of the power supply. The maximum number
of characters is 8. This data is written to internal flash
using the STORE_DEFAULT_ALL command. The factory-
default text string value is 10101010.
The MFR_SERIAL command loads the device with
text (ISO/IEC 8859-1) characters that uniquely identify
the device. The maximum number of characters is 8.
This data is written to internal flash using the STORE_
DEFAULT_ALL command. The factory-default text string
value is 10101010. The upper 4 bytes of MFR_SERIAL
are used to unlock a device that has been password pro-
tected. The lower 4 bytes of MFR_SERIAL are not used to
unlock a device and can be set to any value.
MFR_LOCATION (9Ch)
MFR_REVISION (9Bh)
MAX34461
MFR_SERIAL (9Eh)
MFR_DATE (9Dh)
42