ADL5375-05-EVALZ Analog Devices, ADL5375-05-EVALZ Datasheet - Page 21

• Manufacturer Part Number: ADL5375-05-EVALZ
• Description: RF Development Tools ADL5375-05 EVAL
• Manufacturer: Analog Devices
• Type: Modulators / Demodulatorsr
• Series: ADL5375r

Specifications of ADL5375-05-EVALZ

• Rohs: yes
• Product: Evaluation Boards
• Factory Pack Quantity: 1

Data Sheet
OUTPUT DISABLE
The
shuts down the output amplifier stage to isolate the modulator
from the load. This output is disabled when the voltage on the
DSOP exceeds 2 V. The output is enabled when the DSOP pin is
either tied to ground or left unconnected.
Asserting DSOP further reduces LO leakage (see Figure 27 and
Figure 52) and drives the broadband noise of the device down
ADL5375
incorporates an output disable pin feature that
Rev. B | Page 21 of 36
to just above the KT thermal noise level. Asserting DSOP also
reduces the supply current of the
127 mA.
The time delay between when DSOP pin going low and the
output power being restored is approximately 200 ns. The time
delay when DSOP going high and output being disabled is less
than 100 ns.
ADL5375
from 200 mA to
ADL5375