TQP7M9101-PCB900 TriQuint Semiconductor, TQP7M9101-PCB900 Datasheet - Page 11

• Manufacturer Part Number: TQP7M9101-PCB900
• Description: RF Development Tools 920MHz-960MHz Eval Board
• Manufacturer: TriQuint Semiconductor
• Type: RF Amplifiersr

Specifications of TQP7M9101-PCB900

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: TQP7M9101
• Frequency: 869 MHz to 960 MHz
• Operating Supply Voltage: 5 V
• Part # Aliases: 1080764

TQP7M9101
Package Marking and Dimensions
The component will be marked with a
“7M9101”
alphanumeric lot code on the top
surface of package.
PCB Mounting Pattern
NOTES:
Data Sheet: Rev G 07/03/12
© 2012 TriQuint Semiconductor, Inc.
¼W High Linearity Amplifier
Mechanical Information
1. The pad pattern shown has been developed and tested for optimized assembly at TriQuint Semiconductor. The PCB
2. All dimensions are in millimeters [inches]. Angles are in degrees.
3. Use 1 oz. copper minimum for top and bottom layer metal.
4. Vias are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We
5. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
6. Place mounting screws near the part to fasten a back side heat sink.
7. Do not apply solder mask to the back side of the PC board in the heat sink contact region.
8. Ensure that the backside via region makes good physical contact with the heat sink.
land pattern has been developed to accommodate lead and package tolerances. Since surface mount processes vary
from supplier to supplier, careful process development is recommended.
recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25mm (0.10”).
designator
with
an
7M9101
- 11 of 12
Connecting the Digital World to the Global Network
Disclaimer: Subject to change without notice
®