MAX1038EVKIT Maxim Integrated, MAX1038EVKIT Datasheet - Page 2

• Manufacturer Part Number: MAX1038EVKIT
• Description: Data Conversion IC Development Tools
• Manufacturer: Maxim Integrated
• Series: MAX1036, MAX1037, MAX1038, MAX1039r

Specifications of MAX1038EVKIT

• Interface Type: Serial (2-Wire, I2C)

Before you begin, you will need the following equipment:
•
•
•
•
•
1) Connect a cable from the computer’s parallel port
2) Install the MAX1038 EV kit software on your computer
MAX1038 Evaluation Kit
Figure 1. MAX1038 Evaluation Software’s Main Window
2
MAX1038EVKIT
A 5V DC power supply
An IBM-compatible PC with Windows 95/98
An available parallel port (DB25 female connector
on back of PC)
A standard 25-pin, straight-through, male-to-female
cable to connect the computer’s parallel port to the
MAX1038 EV kit board.
to the MAX1038 EV kit board. Use a 25-pin straight-
through, female-to-male cable.
by running the INSTALL.EXE program on the floppy
disk. The program files are copied and icons are cre-
ated in the Programs section within the Start menu.
_______________________________________________________________________________________
Recommended Equipment
Quick Start
Procedure
3) Connect a 5V DC power supply between the pads
4) Apply an analog input voltage (0 to V
5) Start the MAX1038 EV kit program by double click-
6) The program automatically detects the MAX1038
The evaluation software’s main window (Figure 1) con-
trols the setup byte and config byte. It also displays
the voltage and output code of the input signal(s),
depending on the configuration of the MAX1038.
labeled +5 and GND on the MAX1038 EV kit board.
pad labeled AIN0 (with respect to the pad labeled
GND) of the MAX1038 EV kit board.
ing its icon located in the Programs section within
the Start menu.
EV kit board and displays 2-wire Hardware
Detected in a green font. The AIN0 label (main win-
dow) should automatically display the voltage
applied to the pad labeled AIN0 on the MAX1038
EV kit board.
Detailed Description
of Software
REF
) to the