EVB-PIC24 WIZnet, EVB-PIC24 Datasheet - Page 14

• Manufacturer Part Number: EVB-PIC24
• Description: Development Boards & Kits - PIC / DSPIC W3150A+EVAL BOARD BASED ON PIC24
• Manufacturer: WIZnet

Specifications of EVB-PIC24

• Rohs: yes
• Product: Development Kits
• Interface Type: RS-232
• Data Bus Width: 16 bit
• Dimensions: 50 mm x 40 mm

2.2. Quick Start
After the confirming the Package of EVB B/D, test EVB B/D in the order shown below.
① Connect test PC to EVB B/D using UTP cross cable directly.
② Confirm the network information of Test PC as the following
③ Install AX1 on Test PC. Refer to
④ After the execution of serial terminal program(like Hyperterminal), set up the properties as the
⑤ Turn on the power switch of EVB B/D
-
-
-
Source IP Address : 192.168.0.3
Gateway IP Address : 192.168.0.1
Subnet Mask : 255.255.255.0
Check lighting on power LED(D1) of EVB B/D when powering on
Check if LEDs of D2 and D3 blink three times by turns.
Check if Text LCD display of EVB B/D outputs in the way shown in <Fig 2.1> and shown in <Fig
2.2> on the Terminal Program
Connect test PC to EVB B/D using serial cable directly.
Connect 5V power adaptor to EVB B/D
following.
After the completion of terminal setup, connect EVB B/D and wait.
Following items should be checked upon power on
© Copyright 2006 WIZnet Co., Inc. All rights reserved.
Properties
Bits Per second(Baud Rate)
Data Bits
Stop Bits
Parity
Flow Control
<Table 2-1 : Terminal Properties Setting>
<Fig 2.1 : EVB B/D Text LCD Display>
Chapter 2.1.2.1
Setting Value
57600 bps
8 Bits
1 Bit
No
None
4