S-24CS16A0I-D8S1G Seiko Instruments, S-24CS16A0I-D8S1G Datasheet - Page 9

• Manufacturer Part Number: S-24CS16A0I-D8S1G
• Description: IC EEPROM 16KBIT 400KHZ 8DIP
• Manufacturer: Seiko Instruments

Specifications of S-24CS16A0I-D8S1G

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 16K (2K x 8)
• Speed: 400kHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DIP
• Organization: 2 K x 8
• Interface Type: 2-Wire
• Maximum Clock Frequency: 0.4 MHz
• Access Time: 1 us
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.8 V
• Maximum Operating Current: 4 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 1.8 V, 5.5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Rev.5.2
1. A2 (TEST) Pin
2. SDA (Serial Data Input / Output) Pin
3. SCL (Serial Clock Input) Pin
4. WP (Write Protection Input) Pin
Pin Functions
The slave address cannot be assigned in the S-24CS16A since the addressing function is removed.
The A2 pin should be connected to the GND.
The SDA pin is used for bi-directional transmission of serial data. It consists of a signal input pin and an Nch open-
drain output pin.
The SDA line is usually pulled up to the V
The SCL pin is used for serial clock input. Since signals are processed at the rising or falling edge of the SCL clock
input signal, attention should be paid to the rising time and falling time to conform to the specifications.
The write protection is enabled by connecting the WP pin to the V
connect the pin to the GND.
_00
CC
, and OR-wired with other open-drain or open-collector output devices.
Seiko Instruments Inc.
CC
. When there is no need for write protection,
2-WIRE CMOS SERIAL E
S-24CS16A
2
PROM
9