W5100E01-AVR WIZnet, W5100E01-AVR Datasheet - Page 15

• Manufacturer Part Number: W5100E01-AVR
• Description: Development Boards & Kits - AVR W5100 EVAL BOARD BASED ON AVR
• Manufacturer: WIZnet

Specifications of W5100E01-AVR

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: ATMEGA128
• Core: AVR8
• Interface Type: LAN, RS-232
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 bit

2.3. Quick Start
After the confirming the Package of EVB B/D, test EVB B/D in the order shown below.
① Confirm the testing environment. Refer to
② Confirm the network information of Test PC as the following
③ Install AX1 on Test PC. Refer to
④ After the execution of serial terminal program (like Hyperterminal), set up the properties as the
⑤ Turn on the power switch(SW1) of EVB B/D
-
-
-
Source IP Address : 192.168.0.3
Gateway IP Address : 192.168.0.1
Subnet Mask : 255.255.255.0
Check lighting on power LED(D2) of EVB B/D when powering on
Check if LEDs of D3 and D4 blink three times by turns.
Check if Text LCD display of EVB B/D outputs in the way shown in <Fig 2.3> and shown in <Fig
2.4> on the Terminal Program
Connect test PC to EVB B/D using UTP cable directly.
Connect test PC to EVB B/D using serial cable directly.
Connect 5V power adaptor to EVB B/D
following.
After the completion of terminal setup, connect to EVB B/D and wait.
Following items should be checked upon power on
© Copyright 2007 WIZnet Co., Inc. All rights reserved.
Properties
Bits Per second(Baud Rate)
Data Bits
Stop Bits
Parity
Flow Control
<Table 2-1 : Terminal Properties Setting>
<Fig 2.3 : EVB B/D Text LCD Display >
Chapter 2.2.2.1
Chapter 2.1
Setting Value
57600 bps
8 Bits
1 Bit
No
None
5