EV-ADF4360-8EB1Z Analog Devices, EV-ADF4360-8EB1Z Datasheet - Page 5

• Manufacturer Part Number: EV-ADF4360-8EB1Z
• Description: Clock & Timer Development Tools Evaluation Board I.C.
• Manufacturer: Analog Devices
• Type: PLL Synthesizers / Multipliers / Dividersr

Specifications of EV-ADF4360-8EB1Z

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: ADF4360-8
• Frequency: 250 MHz, 400 MHz
• Operating Supply Voltage: 9 V
• Interface Type: USB
• Operating Supply Current: 40 mA
• Factory Pack Quantity: 1

Evaluation Board User Guide
EVALUATION BOARD SOFTWARE QUICK START PROCEDURES
The control software and USB drivers for
accompany the
To install the software, use the following steps:
1.
2.
The software requires Microsoft’s .NET Framework Version 3.5
or later to be installed on your machine. The installer automati-
cally downloads the framework from the Microsoft website if you
do not have this installed. If you do not have an Internet connec-
tion or have a slow connection on the PC, you can install the
.NET framework directly from the CD. Do this by double-clicking
dotnetfx.exe. Once installed, run ADF4360_Setup.msi again.
WINDOWS XP OS
After you have installed the software, install the USB drivers.
To do so, use the following steps:
1.
2.
3.
Open ADF4360_setup.msi.
The install wizard guides you through the installation
process. The software is installed in a default directory called
C:/Program Files/Analog Devices/ADF4360.
Plug a USB cable into the USB connector on the evaluation
board. The Found New Hardware box opens. See Figure 5.
Choose Install from a list or specified location
(Advanced).
Click Continue Anyway when asked about Windows Logo
testing.
EV-ADF4360-8EB1Z
Figure 5. New Hardware Wizard
on a CD.
EV-ADF4360-8EB1Z
Rev. B | Page 5 of 16
If the installation is successful, the message in Figure 6 appears.
WINDOWS VISTA OS AND WINDOWS 7 (32-BIT) OS
For Windows Vista or Windows 7 (32-bit), you must manually
install the drivers. To do so, use the following steps:
1.
Find the new unknown device (the evaluation board)
in Device Manager and double-click it to open the
properties. The device should be Unknown device,
under Other devices (see Figure 7).
Figure 6. Successful Installation
Figure 7. Device Manager
UG-105