SK-43PT-AR 4D Systems, SK-43PT-AR Datasheet - Page 3

• Manufacturer Part Number: SK-43PT-AR
• Description: Display Development Tools 4.3" Arduino Str Kit w/2GB SD & Prg Adptr
• Manufacturer: 4D Systems

Specifications of SK-43PT-AR

• Rohs: yes
• Product: Starter Kits
• Tool Is For Evaluation Of: uLCD-43PT-AR
• Interface Type: Serial, UART
• Operating Supply Voltage: 4 V to 5.5 V

4D SYSTEMS
uLCD-43-PT-AR
1. Description
The 4D Systems Arduino Display Module Pack is
made up of a 4D Systems Display Module (see
below) specifically customised for the Arduino.
The Pack comes with the uLCD-43-PT Display
module, which has Resistive Touch.
The Pack comprises of:
 Customised uLCD-43-PT Display Module
 4D Arduino Adaptor Shield
4D Arduino Adaptor Shield
 5 way Female-Female Cable
The Arduino Display Module Pack enables an
Arduino user to quickly connect the 4D Arduino
Adaptor Shield to their Arduino, connect the 5 way
cable between the Adaptor and the Display
Module, and be connected in seconds to start
programming their new 4D Systems Display.
The uLCD-43-PT-AR has a comprehensive range of
serial commands ready to be received from the
Arduino, to draw primitives such as lines,
rectangles, circles and text, to displaying images,
playing sound and logging data to uSD card.
The uLCD-43 Display Module
Communication
to
the
Display
Module
is
performed via the Arduino’s serial port (RX and
TX).
A single digital on the Arduino (D2) is utilised for
an external reset for the display.
Power for the display is supplied from the
Arduino’s 5V bus. No external power is required
for the Display Module as all power is supplied
from the Arduino, via the Adaptor Shield.
For a detailed listing of the serial commands
available, please refer to the Appendix section of
this document.
The uLCD-43-PT-AR Pack connected together
(Note: Arduino is not included in Pack)
© 2012 4D SYSTEMS
Page 3 of 9
www.4dsystems.com.au