M27C512-15F6 STMicroelectronics, M27C512-15F6 Datasheet - Page 9

• Manufacturer Part Number: M27C512-15F6
• Description: IC EPROM 512KBIT 150NS 28CDIP
• Manufacturer: STMicroelectronics

Specifications of M27C512-15F6

• Format - Memory: EPROMs
• Memory Type: UV EPROM
• Memory Size: 512K (64K x 8)
• Speed: 150ns
• Interface: Parallel
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-CDIP (0.600", 15.24mm) Window
• Capacitance, Input: 6 pF
• Capacitance, Output: 12 pF
• Current, Input, Leakage: ±10 μA (Read)
• Current, Operating: 30 mA (Read)
• Current, Output, Leakage: ±10 μA (Read)
• Current, Supply: 30 mA
• Density: 512K
• Organization: 64K×8
• Package Type: FDIP28W
• Temperature, Operating: 0 to +70 °C
• Temperature, Operating, Maximum: 85 °C
• Temperature, Operating, Minimum: -40 °C
• Time, Access: 100 ns
• Time, Fall: ≤20 ns
• Time, Rise: ≤20 ns
• Voltage, Input, High: 6 V (Read)
• Voltage, Input, High Level: 2 V (Min.)
• Voltage, Input, Low: 0.8 V (Read)
• Voltage, Input, Low Level: -0.3 V (Min.)
• Voltage, Output, High: 4.3 V (Read)
• Voltage, Output, Low: 0.4 V (Read)
• Voltage, Programmable: 11.5 V (Min.)
• Voltage, Supply: 5 V
• Interface Type: Parallel
• Bus Type: Parallel
• In System Programmable: In System/External
• Access Time (max): 150ns
• Reprogramming Technique: UV
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (min): 4.5V
• Operating Supply Voltage (max): 5.5V
• Supply Current: 50mA
• Pin Count: 28
• Mounting: Through Hole
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-1676-5

MAXIMUM RATING
Stressing the device outside the ratings listed in
Table 4.
vice. These are stress ratings only, and operation
of the device at these, or any other conditions out-
side those indicated in the Operating sections of
Table 4. Absolute Maximum Ratings
Note: 1. Compliant with the JEDEC Std J-STD-020B (for small body, Sn-Pb or Pb assermbly), the ST ECOPACK
Symbol
T
V
V
T
T
2. Minimum DC voltage on Input or Output is –0.5V with possible undershoot to –2.0V for a period less than 20ns. Maximum DC
3. Depends on range.
V
V
A9
LEAD
IO
BIAS
T
STG
CC
PP
A
and the European directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU.
voltage on Output is V
(2)
(2)
may cause permanent damage to the de-
Ambient Operating Temperature
Temperature Under Bias
Storage Temperature
Lead Temperature during Soldering
Input or Output Voltage (except A9)
Supply Voltage
A9 Voltage
Program Supply Voltage
CC
+0.5V with possible overshoot to V
Parameter
(3)
CC
this specification, is not implied. Exposure to Ab-
solute Maximum Rating conditions for extended
periods may affect device reliability. Refer also to
the STMicroelectronics SURE Program and other
relevant quality documents.
+2V for a period less than 20ns.
–40 to 125
–50 to 125
–65 to 150
–2 to 13.5
–2 to 14
(note 1)
–2 to 7
–2 to 7
Value
®
7191395 specification,
M27C512
Unit
°C
°C
°C
°C
V
V
V
V
9/22