MAX3227EEAE-T Maxim Integrated, MAX3227EEAE-T Datasheet - Page 13

• Manufacturer Part Number: MAX3227EEAE-T
• Description: RS-232 Interface IC
• Manufacturer: Maxim Integrated
• Series: MAX3224E, MAX3225E, MAX3226E, MAX3227E, MAX3244E, MAX3245Er

Specifications of MAX3227EEAE-T

• Data Rate: 1 Mbps
• Operating Supply Voltage: 3 V to 5.5 V
• Supply Current: 1 mA
• Operating Temperature Range: 0 C to + 70 C
• Mounting Style: SMD/SMT
• Function: Transceiver
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Number Of Drivers: 1
• Number Of I/os: 4
• Number Of Receivers: 1
• Propagation Delay Time Ns: 0.15 us
• Shutdown: Yes

Maxim Integrated
these pins against ESD of ±15kV without damage. The
ESD structures withstand high ESD in all states: normal
operation, shutdown, and powered down. After an ESD
event, Maxim’s E versions keep working without
latchup, whereas competing RS-232 products can
latch and must be powered down to remove latchup.
ESD protection can be tested in various ways; the
transmitter outputs and receiver inputs of this product
family are characterized for protection to the following
limits:
1) ±15kV using the Human Body Model
2) ±8kV using the Contact-Discharge Method specified
3) ±15kV using IEC 1000-4-2’s Air-Gap Method.
Figure 6a. Human Body ESD Test Model
Figure 6b. Human Body Current Waveform
±15kV ESD-Protected, 1µA, 1Mbps 3.0V to 5.5V,
AMPERES
MAX3226E/MAX3227E/MAX3244E/MAX3245E
in IEC 1000-4-2
VOLTAGE
SOURCE
HIGH-
RS-232 Transceivers with AutoShutdown Plus
DC
I
P
36.8%
100%
90%
10%
CHARGE-CURRENT
0
LIMIT RESISTOR
0
R
t
C
RL
1MΩ
100pF
C s
STORAGE
CAPACITOR
CURRENT WAVEFORM
R
TIME
RESISTANCE
D
DISCHARGE
1500Ω
t
DL
I r
PEAK-TO-PEAK RINGING
(NOT DRAWN TO SCALE)
DEVICE
UNDER
TEST
ESD performance depends on a variety of conditions.
Contact Maxim for a reliability report that documents
test setup, test methodology, and test results.
Figure 6a shows the Human Body Model and Figure 6b
shows the current waveform it generates when dis-
charged into a low impedance. This model consists of
a 100pF capacitor charged to the ESD voltage of inter-
est, which is then discharged into the test device
through a 1.5kΩ resistor.
Figure 7a. IEC 1000-4-2 ESD Test Model
Figure 7b. IEC 1000-4-2 ESD Generator Current Waveform
t r = 0.7ns to 1ns
VOLTAGE
SOURCE
HIGH-
DC
CHARGE CURRENT
100%
R
LIMIT RESISTOR
90%
10%
C
50MΩ to 100MΩ
I
150pF
C s
30ns
STORAGE
CAPACITOR
R
RESISTANCE
DISCHARGE
D
330Ω
60ns
ESD Test Conditions
Human Body Model
DEVICE
UNDER
TEST
t
13