25LC1024-I/P Microchip Technology, 25LC1024-I/P Datasheet - Page 17

• Manufacturer Part Number: 25LC1024-I/P
• Description: IC EEPROM 1MBIT 20MHZ 8DIP
• Manufacturer: Microchip Technology

Specifications of 25LC1024-I/P

• Memory Size: 1M (128K x 8)
• Package / Case: 8-DIP (0.300", 7.62mm)
• Operating Temperature: -40°C ~ 85°C
• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Speed: 20MHz
• Interface: SPI, 3-Wire Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Organization: 128 K x 8
• Interface Type: SPI
• Maximum Clock Frequency: 20 MHz
• Access Time: 50 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.5 V
• Maximum Operating Current: 10 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 2.5 V, 5.5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

2.11
Deep Power-Down mode of the 25LC1024 is its lowest
power consumption state. The device will not respond
to any of the Read or Write commands while in Deep
Power-Down mode, and therefore it can be used as an
additional software write protection feature.
The Deep Power-Down mode is entered by driving CS
low, followed by the instruction code (Figure 2-11) onto
the SI line, followed by driving CS high.
If the CS pin is not driven high after the eighth bit of the
instruction code has been given, the device will not
execute Deep power-down. Once the CS line is driven
high, there is a delay (T
to its lowest consumption.
FIGURE 2-11:
 2010 Microchip Technology Inc.
DEEP POWER-DOWN MODE
DEEP POWER-DOWN SEQUENCE
DP
SCK
) before the current settles
CS
SO
SI
1
0
0
1
High-Impedance
1
2
1
3
All instructions given during Deep Power-Down mode
are ignored except the Read Electronic Signature
Command (RDID). The RDID command will release
the device from Deep power-down and outputs the
electronic signature on the SO pin, and then returns
the device to Standby mode after delay (T
Deep Power-Down mode automatically releases at
device power-down. Once power is restored to the
device, it will power-up in the Standby mode.
1
4
0
5
0
6
1
7
25LC1024
DS22064D-page 17
REL
)