24LC512T-I/SM Microchip Technology, 24LC512T-I/SM Datasheet - Page 12

• Manufacturer Part Number: 24LC512T-I/SM
• Description: IC EEPROM 512KBIT 400KHZ 8SOIC
• Manufacturer: Microchip Technology

Specifications of 24LC512T-I/SM

• Memory Size: 512K (64K x 8)
• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Speed: 400kHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• Memory Configuration: 64K X 8
• Ic Interface Type: I2C
• Clock Frequency: 400kHz
• Supply Voltage Range: 2.5V To 5.5V
• Memory Case Style: SOIJ
• No. Of Pins: 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 24LC512T-I/SM; 24LC512T-I/SMTR

24AA512/24LC512/24FC512
7.0
Since the device will not acknowledge during a write
cycle, this can be used to determine when the cycle is
complete (this feature can be used to maximize bus
throughput). Once the Stop condition for a Write
command has been issued from the master, the device
initiates the internally timed write cycle. ACK polling
can be initiated immediately. This involves the master
sending a Start condition, followed by the control byte
for a Write command (R/W = 0). If the device is still
busy with the write cycle, then no ACK will be returned.
If no ACK is returned, then the Start bit and control byte
must be re-sent. If the cycle is complete, then the
device will return the ACK and the master can then
proceed with the next Read or Write command. See
Figure 7-1 for flow diagram.
DS21754M-page 12
ACKNOWLEDGE POLLING
FIGURE 7-1:
Send Control Byte
Initiate Write Cycle
Write Command
with R/W = 0
Acknowledge
Condition to
Send Stop
Send Start
Did Device
(ACK = 0)?
Operation
Send
Next
ACKNOWLEDGE POLLING
FLOW
 2010 Microchip Technology Inc.
Yes
No