ZLED7002ZI1R ZMDI, ZLED7002ZI1R Datasheet - Page 7

• Manufacturer Part Number: ZLED7002ZI1R
• Description: LED Lighting Drivers LED driver
• Manufacturer: ZMDI

Specifications of ZLED7002ZI1R

• Rohs: yes
• Input Voltage: 2.7 V to 5.5 V
• Maximum Supply Current: 320 uA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: SOP-8
• Minimum Operating Temperature: - 25 C

Figure 1.2
2
2.1.
The ZLED7002 is an LED driver for two channels designated as the MAIN channel and the SUB channel. Typically, only one
of the channels is on and the other is off. External resistors R1 and R2 connected to UV pin form a voltage divider across the
power supply. When the power supply voltage has risen high enough to create a voltage at the UV pin that is above a set
threshold, the MAIN LED channel is activated and the SUB channel is off. If the supply falls and the resulting voltage at the UV
pin is below the threshold, the SUB channel becomes active and the MAIN channel is turned off.
When the MAIN channel is active, the ZLED7002 provides a constant current source for driving the MAIN LED channel. Its
current level is set by an external resistor (R3) between the Iset and GND pins (see section 2.3). When the SUB LED channel
is active, its current is determined by external components (see section 2.4) and the ZLED7002 pulls the SUB pin to ground.
Refer to the application circuit in Figure 3.1 for the location of the components referred to in the following sections.
Data Sheet
August 10, 2011
ZLED7002
Toggle (Side-Step) Dual-Channel LED Driver
Circuit Description
ZLED7002 Overview
Main LED Current versus Power Supply (4V to 5.4V DC)
© 2011 Zentrum Mikroelektronik Dresden AG — Rev.3.0
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without
the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.
V
DC
(Volts)
7 of 13