AP-SDM512MEPANS-HT Apacer, AP-SDM512MEPANS-HT Datasheet - Page 33

• Manufacturer Part Number: AP-SDM512MEPANS-HT
• Description: Solid State Drives - SSD SDM2 7P/90D SATA DISK MOD SLC 512M ST
• Manufacturer: Apacer

Specifications of AP-SDM512MEPANS-HT

• Rohs: yes
• Product: SATA Disk Modules
• Memory Size: 512 MB
• Sustained Read: 27 MB/s
• Sustained Write: 23 MB/s
• Active Mode Current: 165 mA
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 70 C
• Connector Type: 7-pin signal, 2-pin power
• Dimensions: 32.5 mm x 23.13 mm
• Minimum Operating Temperature: 0 C

SATA-Disk Module
Ⅱ Ⅱ Ⅱ Ⅱ
AP-SDMxxxxXPANS-HTX
3.5
S.M.A.R.T. Technology
S.M.A.R.T. is an acronym for Self-Monitoring, Analysis and Reporting Technology, an open standard allowing
disk drives to automatically monitor their own health and report potential problems. It protects the user from
unscheduled downtime by monitoring and storing critical drive performance and calibration parameters. Ideally,
this should allow taking proactive actions to prevent impending drive failure.
Apacer SDM uses the standard SMART command B0h to read data from the drive for SMART feature as the
SATA Rev. 2.6 ATA/ATAPI-7 specifications. Based on the SFF-8035i Rev. 2.0 specifications, Apacer SMART
defines 3 vendor-specified SMART Attribute IDs (E5h, EAh-EBh, and E8h) in the SDM. They represent Flash
ID, maximum erase count, average erase count, good block count, free-list block count, and firmware version
information. When the Apacer SMART Utility running on the host, it analyzes and reports the disk status to the
host before the SDM is in critical condition.
32
© 2011 Apacer Technology Inc.
Rev. 1.1