AP-CF032GB5GS-NDNR Apacer, AP-CF032GB5GS-NDNR Datasheet - Page 21

• Manufacturer Part Number: AP-CF032GB5GS-NDNR
• Description: Memory Cards CF4 MLC STD 32GB COM COMPACT FLASH CARD
• Manufacturer: Apacer

Specifications of AP-CF032GB5GS-NDNR

• Rohs: yes
• Product: Compact Flash
• Memory Size: 32 GB
• Operating Supply Voltage: 3.3 V, 5 V
• Maximum Operating Temperature: + 70 C
• Dimensions: 42.8 mm x 36.4 mm x 3.3 mm
• Minimum Operating Temperature: 0 C





© 2009 Apacer Technology Inc.
Word 60-61: Total Sectors Addressable in LBA Mode
Word 63: Multiword DMA Transfer
Word 64: Advanced PIO Data Transfer Mode
Word 65: Minimum Multiword DMA Transfer Cycle Time Per Word
This field contains the number of sectors addressable for the Device in LBA mode only.
This field identifies the Multiword DMA transfer modes supported by the Device module and
indicates the mode that is currently selected. Only one DMA mode shall be selected at any given
time.
Bit
15-11
10
Bit (7:0) is defined as the PIO data and register transfer supported field. If this field is supported, Bit
1of word 53 shall be set to one. This field is bit significant. Any number of bits may be set to one in
this field by the device to indicate the PIO modes the device is capable of supporting. Of these bits,
bit (7:2) are Reserved for future PIO modes.
This field defines the minimum Multiword DMA transfer cycle time per word. This field defines, in
nanoseconds, the minimum cycle time that the Device supports when performing Multiword DMA
transfers on a per word basis. The Device supports up to Multiword DMA Mode-2, so this field is set
to 120ns.
9
8
7-3
2
1
0
Bit
0
1
Function
Reserved
Multiword DMA mode-2 selected
1: Multiword DMA mode-2 is selected and bits 8 and 9 are cleared to 0.
0: Multiword DMA mode-2 is not selected.
Multiword DMA mode-1 selected
1: Multiword DMA mode-1 is selected and 8 and 10 shall be cleared to 0.
0: Multiword DMA mode-1 is not selected.
Multiword DMA mode-0 selected
1: Multiword DMA mode-0 is selected and bits 9 and 10 are cleared to 0.
0 then Multiword DMA mode-0 is not selected.
Reserved
Multiword DMA mode-2 supported
1: Multiword DMA mode-2 and below are supported and Bits 0 and 1 shall be set to 1.
Multiword DMA mode-1 supported
1: Multiword DMA mode-1 and below are supported.
Multiword DMA mode-0 supported
1: Multiword DMA mode-0 is supported.
Function
1: PIO Mode-3 is supported.
1: PIO Mode-4 is supported.
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
20
Rev. 1.0