ISL28345FBZ-T7A Intersil, ISL28345FBZ-T7A Datasheet - Page 6

• Manufacturer Part Number: ISL28345FBZ-T7A
• Description: Operational Amplifiers - Op Amps ISL28345FBZ QUAD 40V PREC LW PWR OPERTNL
• Manufacturer: Intersil

Specifications of ISL28345FBZ-T7A

• Product Category: Operational Amplifiers - Op Amps
• Rohs: yes
• Number Of Channels: 4
• Common Mode Rejection Ratio (min): 80 dB
• Input Offset Voltage: 1 mV
• Input Bias Current (max): 5 nA
• Operating Supply Voltage: 4.5 V to 40 V, +/- 2.25 V to +/- 20 V
• Mounting Style: SMD/SMT
• Package / Case: SOIC-14
• Slew Rate: 0.4 V/us
• Shutdown: No
• Output Current: 40 mA
• Maximum Operating Temperature: + 125 C
• Gain Bandwidth Product: 1.2 MHz
• Minimum Dual Supply Voltage: +/- 2.25 V
• Minimum Operating Temperature: - 40 C
• Supply Current: 0.7 mA

ISL28325, ISL28345
Applications Information
Functional Description
The ISL28325 and ISL28345 are dual and quad general purpose
amplifiers featuring low noise vs power consumption. They are
offered in industry standard pinouts in 8 Ld SOIC, 8 Ld MSOP and
14 Ld SOIC packages. Applications for this amplifier include
active filters, medical and analytical instrumentation, power
supply controls, and industrial controls..
Operating Voltage Range
The devices are designed to operate over the 4.5V (±2.25V) to
40V (±20V) range over the -40°C to +125°C temperature range.
For best amplifier performance, decouple the power supply with
a 0.01µF or larger capacitors by placing them close to the supply
pins of the amplifier.
Input ESD Diode Protection
The input terminals (IN+ and IN-) have internal ESD protection
diodes to the positive and negative supply rails, series connected
500Ω current limiting resistors and an anti-parallel diode pair
across the inputs.
The series resistors limit the high feed-through currents that can
occur in pulse applications when the input dV/dT exceeds the
0.4V/µs slew rate of the amplifier. Without the series resistors, the
input can forward-bias the anti-parallel diodes causing current to
flow to the output resulting in severe distortion and possible diode
failure.
In applications where one or both amplifier input terminals are at
risk of exposure to high voltages beyond the power supply rails,
current limiting resistors may be needed at the input terminal to
limit the current through the power supply ESD diodes to 20mA
max.
6
September 27, 2011
FN7854.0