MPS-8 GAMEWELL-FCI [Gamewell-FCI by Honeywell], MPS-8 Datasheet

MPS-8

Manufacturer Part Number

MPS-8

Description

Main power supply, complete with lead acid battery chrger module

Manufacturer

GAMEWELL-FCI [Gamewell-FCI by Honeywell]

Datasheet

1.MPS-8.pdf (2 pages)

Current page: 1 of 2
Download datasheet (115Kb)

Description

Gamewell-FCI’s 600 Series power supplies, the MPS-8

and the APS-8, have been developed for today’s critical

power requirements that demand high efficiency and out-

standing reliability. The extensive use of audio/visual

devices for ADA signaling and UL 1971 notification appli-

ances has increased the amount of power the fire alarm

control panel (FACP) must supply. The MPS-8 and APS-8

supply that power with margins to spare. The MPS-8 Main

Power Supply is controlled by the FACP microprocessor to

maintain adequate voltage levels and output current. The

IF650 can accommodate an additional MPS-8 (expansion

cabinet required) if greater system power or battery charg-

ing is required.

The APS-8 is an Auxiliary Power Supply specifically

designed to provide 8.0 amps of 24 VDC signaling or auxil-

iary power to the system. APS-8 power supplies may be

added to a system as required. The APS-8 does not con-

nect to the MPU bus directly, so it does not impact the num-

ber of input or output modules that may be added to the

system. The APS632-8 is similar to the APS-8 — the

APS632-8 is designed to fit into the IF632’s expansion

cabinet (CAB632-4).

Operation

The MPS-8 and connected batteries are supervised

through the FACP CPU. In the event of loss of either main

AC or battery power, the FACP CPU will report the trouble

at the operator’s display. The MPS-8 also provides brown-

out detection for the system.

The standard battery charger on the MPS-8 is capable of

charging up to 60 AH batteries.

The APS-8 auxiliary power supply is monitored through its

connection to output modules such as the Universal Signal

Module (USM). Battery standby power for the APS-8 is

supplied through a connection at the MPS-8. The MPS-8,

with the main CPU, manages the secondary power source.

Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

www.gamewell-fci.com

GAMEWELL-FCI

Features

MPS-8 Main Power Supply:

• 8.0 A power supply.

• 4.0 A system power, 4.0 A signaling power.

• Standard with IF632 and IF650 FACPs.

• Supervised and controlled by the main FACP CPU.

• ADA inrush-tolerant design.

• 60 AH battery charging capacity.

• Automatic high-rate charger.

APS-8 or APS632-8:

• Auxiliary Power Supply

• 8.0 A auxiliary power supply.

• Provides 24 VDC signal or auxiliary power.

• ADA inrush-tolerant design.

• IdentiFlex 632 and IdentiFlex 650 systems support an

unlimited number of auxiliary power supplies.

MPS-8 and APS-8

MPS-8

An ISO 9000-2000 Company

600 Series Power Supplies

SIGNALING

APPROVED

600 Series

MEA

Approved

CS-2023 Rev. A page 1 of 2

APPROVED

APS-8

Related parts for MPS-8

MPS-8 Summary of contents

Page 1

... AC or battery power, the FACP CPU will report the trouble at the operator’s display. The MPS-8 also provides brown- out detection for the system. The standard battery charger on the MPS-8 is capable of charging batteries. The APS-8 auxiliary power supply is monitored through its connection to output modules such as the Universal Signal Module (USM) ...

Page 2

... Standard Applications The MPS-8 is the Main Power Supply for the IF632 and IF650 FACPs. The MPS-8 provides 4.0 amps for system power and 4.0 amps for signal power. The MPS-8 also pro- vides power monitoring and battery charging capabilities for the system. The APS-8 is used whenever additional signal power or 24 VDC auxiliary power is required ...

Related keywords

MPS-8 datasheet
MPS-8 data sheet
MPS-8 pdf datasheet
MPS-8 component
MPS-8 part
MPS-8 distributor
MPS-8 RoHS
MPS-8 datasheet download