B43560 EPCOS [EPCOS], B43560 Datasheet - Page 5

• Manufacturer Part Number: B43560
• Description: Capacitors with screw terminals
• Manufacturer: EPCOS [EPCOS]

Packing
Capacitor diameter d
64.3 mm
76.9 mm
91.0 mm
For ecological reasons the packing is pure cardboard.
Special designs
Ordering codes:
Design
Low inductance (13 nH)
For heat sink mounting
Please read Cautions and warnings and
Important notes at the end of this document.
Low-inductance design
For heat sink mounting
Design for optimal connection of capacitors to the heat sink when using base cooling with the
following features (refer to chapter "General technical information, 5.2 Cooling"):
This version is available only for capacitors without threaded stud and for diameters 64.3 mm.
Regarding ripple current and useful life, please refer to column I
data and ordering codes" and in the useful life curves.
Electrical insulation of the capacitors base with 2 overlapping thermal pads for optimal heat
flow (minimal thermal resistance at the capacitor base)
Minimal overall length tolerance ( 0.35 mm) for mounting between heat sink and bus bar
Case with extra groove near the base for clamp mounting (recommended ring clamp
B44030A0165B ... A0190B)
Packing units (pcs.)
15
12
8
Identification in 3rd
block of ordering code
M003
M007
Page 5 of 14
Remark
For capacitors with diameter d
For capacitors with diameter d
without threaded stud
High reliability
B43560, B43580
AC,R
(B) in the table "Technical
105 C
64.3 mm
64.3 mm and