G6K-2F OMRON [Omron Electronics LLC], G6K-2F Datasheet - Page 9

• Manufacturer Part Number: G6K-2F
• Manufacturer: OMRON [Omron Electronics LLC]

G6K
Recommended Soldering Method
Temperature indicate the surface temperature of the PCBs.
IRS Method (for surface mounting terminal models)
(1) IRS Method (Mounting Solder: Lead)
• The thickness of cream solder to be applied should be within a range between 150 and 200 µm on OMRON’s recommended PCB pattern.
• In order to perform correct soldering, it is recommended that the correct soldering conditions be maintained as shown below on the left
Visually check that the Relay is properly soldered.
■
UL approval:UL1950 (File No. E41515)
CSA approval:C22.2 No. 950 (File No. LR31928)
DPDT
side.
PCB
Correct Soldering
Approved Standards
220 to
180 to
Contact form
245
200
150
Terminal
Relay
Solder
Preheating
Land
90 to 120
G6K-2G(F/P): 3 to 12 VDC
G6K(U)-2G(F/P)-Y: 3 to 24 VDC
Incorrect Soldering
Soldering
20 to 30
Coil rating
Insufficient
amount of
solder
Time (s)
1 A at 30 VDC
0.5 A at 60 VDC
0.3 A at 125 VAC
Excessive
amount of
solder
Contact rating
(2) IRS Method (Mounting Solder: Lead-free)
Note: The temperature profile indicates the
250 max.
230
180
150
temperature of the relay terminal
section.
Upper surface of case (peak):
255˚C max.
120 max.
Preheating
6,000
Number of test operations
30 max.
Soldering
Relay
terminal
section
Time (s)
G6K
99