PS2761-1-F4-A CEL [California Eastern Labs], PS2761-1-F4-A Datasheet - Page 8

• Manufacturer Part Number: PS2761-1-F4-A
• Description: HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER
• Manufacturer: CEL [California Eastern Labs]

NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Dip soldering
(3) Cautions
2. Cautions regarding noise
8
corrector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.
• Peak reflow temperature
• Time of temperature higher than 210 °C
• Number of reflows
• Flux
• Temperature
• Time
• Number of times
• Flux
• Fluxes
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
100 to 160 ˚C
260 °C or below (molten solder temperature)
10 seconds or less
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of
0.2 Wt % is recommended.)
Recommended Temperature Profile of Infrared Reflow
(preheating)
60 to 120 s
Data Sheet PN10249EJ01V0DS
235 °C or below (package surface temperature)
30 seconds or less
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt % is recommended.)
Time (s)
(heating)
to 30 s
to 10 s
235 ˚C (peak temperature)
210 ˚C
PS2761-1