LS24D16C TELEDYNE [Teledyne Technologies Incorporated], LS24D16C Datasheet - Page 4

• Manufacturer Part Number: LS24D16C
• Description: 30A to 600 Vac SIP Package DC control
• Manufacturer: TELEDYNE [Teledyne Technologies Incorporated]

LS 4
In each case, allow 0.16 in. (4mm) between the printed circuit board and the heat sink to keep a correct insulation
between input to output (0.16 in./4mm insulated washer). To maintain a good contact between the SSR and the heat
sink, use thermal grease.
(51)
Heat sinks references:
FW100: L=100mm about 4°C/W (1SSR) without ventilation (3.6°C/W with 4SSRs )
FW150: L=150mm about 3°C/W (1SSR) without ventilation (2.6°C/W with 6SSRs )
2
Supports additional heat sink if necessary
Figure 7b — Clips with screws on standard heat sinks; dimensions in inches (mm)
Figure 7a — Thermal heat sinks with mounting clips; dimensions in inches (mm)
(7.9 ± 0.15)
0.311 ±006
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
to maintain
isolation
0.16 (4)
0.16 (4) to
maintain
insulation
MOUNTING EXAMPLES
Thermal grease
Clips reference: L19101
Printed circuit board
M3
(26.5)
1.04
© 2003 TELEDYNE RELAYS
Series LS
Thermal grease
clips: L19100
LS\032003\Q2