ICX039 SONY [Sony Corporation], ICX039 Datasheet - Page 12

• Manufacturer Part Number: ICX039
• Description: Diagonal 8mm (Type 1/2) CCD Image Sensor for CCIR Black-and-White Video Cameras
• Manufacturer: SONY [Sony Corporation]

5. Dark signal
6. Dark signal shading
7. Flicker
8. Lag
Measure the average value of the signal output (Vdt [mV]) with the device ambient temperature 60°C and
the device in the light-obstructed state, using the horizontal idle transfer level as a reference.
After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark
signal output and substitute the values into the following formula.
∆Vdt = Vdmax – Vdmin [mV]
Set to standard imaging condition II. Adjust the luminous intensity so that the average value of the signal
output is 200mV, and then measure the difference in the signal level between fields (∆Vf [mV]). Then
substitute the value into the following formula.
F = (∆Vf/200) x 100 [%]
Adjust the signal output value generated by strobe light to 200mV. After setting the strobe light so that it
strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following
formula.
Lag = (Vlag/200) x 100 [%]
Strobe light
Output
timing
FLD
V1
Light
Signal output 200mV
– 12 –
Vlag (lag)
ICX039DLA