JSH-85L3AB1-10 JDSU [JDS Uniphase Corporation], JSH-85L3AB1-10 Datasheet - Page 12

• Manufacturer Part Number: JSH-85L3AB1-10
• Description: 8.5 G Fibre Channel Compliant SFP+ 1310 nm Limiting Transceiver
• Manufacturer: JDSU [JDS Uniphase Corporation]

12
Feature
Component safety
RoHS-compliant
Laser eye safety
Electromagnetic Compatibility
Electromagnetic emissions
Electromagnetic immunity
ESD immunity
Radiated immunity
1. For further details, see Eye Safety
Regulatory Compliance
1
3.7 Regulatory Compliance
The JSH-85L3Ax1-10 optical transceiver complies with international Electromagnetic
Compatibility (EMC) and international safety requirements and standards. EMC
performance is dependent on the overall system design. Information included herein
is intended as a figure of merit for designers to use as a basis for design decisions.
The JSH-85L3Ax1-10 optical transceiver is lead-free and RoHS-compliant per
Directive 2002/95/EC of the European Parliament and of the Council of 27 January
2003 on the restriction of the use of certain hazardous substances in electrical and
electronic equipment.
Test Method
UL 60950
UL 94, V0
IEC 60950
Directive 2002/95/EC
IEC 60825-1:2007 and
EN 60825-1:2007
U. S. 21CFR 1040.10
EMC Directive 89/336/EEC
FCC CFR47 Part 15
IEC/CISPR 22
AS/NZS CISPR22
EN 55022
ICES-003, Issue 4
VCCI-03
EMC Directive 89/336/EEC
IEC/CISPR/24
EN 55024
EN 61000-4-2
EN 61000-4-3
8.5 G FIBRE CHANNEL COMPLIANT SFP+
1310 NM LIMITING TRANSCEIvER
Performance
UL File E209897
TUV Report/Certificate (CB scheme)
Compliant per the Directive 2002/95/EC of the European
Parliament and of the Council of 27 January 2003 on the
restriction of the use of certain hazardous substances in
electrical and electronic equipment.
TUV Certificate
CDRH compliant and Class 1 laser eye safe
Noise frequency range: 30 MHz to 40 GHz.
Good system EMI design practice required
to achieve Class B margins.
Exceeds requirements. Withstand discharges of 4 kV
contact and 8 kV air discharge to Criterion A, and 8 kV
contact and 25 kV air discharge to Criterion B.
Exceeds requirements. Field strength of 10 V/m RMS,
from 10 MHz to 1 GHz. No effect on transmitter/receiver
performance is detectable between these limits.