DP-2 GAMEWELL-FCI [Gamewell-FCI by Honeywell], DP-2 Datasheet - Page 3

• Manufacturer Part Number: DP-2
• Description: Digital Alarm Communicator Transmitter
• Manufacturer: GAMEWELL-FCI [Gamewell-FCI by Honeywell]

Ordering Information
411UDAC CS-2509 09/01/06
411UDAC
DP-2
PRO-411
PK-CD
MCBL-7
411RK
BAT-1270
17062
17066
Four-channel, dual-line, stand-alone or slave Fire Alarm
Communicator. Includes housing, operating and program-
ming instructions. Use PRO-411 (below) hand-held DACT
programmer for local programming; or PK-411UD (below)
Windows®-based programming software for remote pro-
gramming and real-time diagnostics.
Front dress panel.
Optional hand-held DACT programmer which can be used to
troubleshoot and program the 411UDAC, as well as access
the various modes of operation.
Remote upload/download programming software kit. The
PK-CD enables a user to program the 411UDAC off-site via
the public switched telephone network using any personal
computer with Windows® 3.1 or greater or Windows® 95
and a 1200-baud Hayes®-compatible modem.
Optional dry auxiliary Form-C relays, with contacts rated
for 2.0 amps @ 30 VDC (resistive) or 0.5 amps @ 30 VAC
(resistive). Optional use requires two relays.
DACT phone cord, seven feet long (two required).
Battery, 12-volt, 7.0 AH (one required for 24-hour systems;
two [wired in parallel] required for 60-hour systems).
Gamewell key.
Gamewell lock.
Page 3 of 4
• End-of-line resistor: 2.2K ohms, 1/2 watt
Operation for each channel:
• Channel/Input1, Style B (Class B) two-wire
• Channel/Input 2 and Channel/Input 4 Style
• Refer to Device Compatibility Document for
Notification Appliance Circuit
• Style Y (Class B) circuit.
• Power-limited and supervised (monitored for
• Operating voltage nominal 13.8 VDC.
• Current for all external devices: 1.0 amp.
• End-of-line resistor: 2.2K ohms, 1/2 watt
• Refer to Device Compatibility Document for
Two Optional Form-C Relays
12 VDC Resettable Power (TB4 Terminals
• Operating voltage: nominal 12 volts.
• Up to 200 mA available to power four-wire
• Power-limited and supervised circuitry.
• Recommended maximum standby current: 50
OPERATING POWER:
Specifications continued...
(P/N 27070, UL listed).
smoke detector input and Channel/Input 3,
Style B (Class B) or Style D (Class A) two-
wire smoke detector or waterflow input.
B (Class B) contact closure input.
listed compatible devices.
(TB4 Terminals 1[+] and 2 [—]:
opens, shorts, and earth fault).
(P/N 27070).
listed compatible devices.
(TB1 Terminals 1 through 6):
Operating voltage: nominal 12 VDC.
Contact rating: 2.0 amps @ 30 VDC
(resistive), or 0.5 amps @ 30 VAC.
3[+] and 4 [—]:
smoke detectors.
mA.
Note: For power supply and battery
calculations, refer to the 411UDAC manual.
Primary Power Source (AC):
AC power connections are made inside the
411UDAC cabinet. The primary power source
is 120 VAC, 60 Hz, 0.3 amps.
Secondary Power Source (Batteries):
One 12-volt battery can provide power for up
to 7 AH applications. Two 12-volt, 7 AH
batteries (in parallel) can provide power for
up to 14 AH applications (60-hour standby).
The battery charger is current-limited and
capable of recharging sealed lead-acid-type
batteries. The charger shuts off when the
system is in alarm. Refer to the battery
calculations table in the 411UDAC manual to
determine the correct battery rating.