557GI-05A ICST [Integrated Circuit Systems], 557GI-05A Datasheet - Page 5
![no-image](/images/no-image-200.jpg)
557GI-05A
Manufacturer Part Number
557GI-05A
Description
Quad Differential PCI-Express Clock Source
Manufacturer
ICST [Integrated Circuit Systems]
Datasheet
1.557GI-05A.pdf
(12 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
557GI-05ALFT
Manufacturer:
IDT
Quantity:
20 000
ICS557-05A
Quad Differential PCI-Express Clock Source
Output Structures
6*IREF
IREF
=2.3 mA
See Output Termination
Sections - Pages 3 ~ 5
Ω
R
475
R
General PCB Layout Recommendations
For optimum device performance and lowest output
phase noise, the following guidelines should be
observed.
1. Each 0.01µF decoupling capacitor should be
mounted on the component side of the board as close
to the VDD pin as possible.
2. No vias should be used between decoupling
capacitor and VDD pin.
3. The PCB trace to VDD pin should be kept as short
as possible, as should the PCB trace to the ground via.
Distance of the ferrite bead and bulk decoupling from
the device is less critical.
4. An optimum layout is one with all components on the
same side of the board, minimizing vias through other
signal layers (any ferrite beads and bulk decoupling
capacitors can be mounted on the back). Other signal
traces should be routed away from the
ICS557-05A.This includes signal traces just
underneath the device, or on layers adjacent to the
ground plane layer used by the device.
5
MDS 557-05A E
Revision 011606
www.icst.com
Integrated Circuit Systems, Inc.
●
525 Race Street, San Jose, CA 95126
●
tel (408) 297-1201
●