1N4130UR Microsemi Corporation, 1N4130UR Datasheet
![no-image](/images/manufacturer_photos/0/4/446/microsemi_corporation_sml.jpg)
1N4130UR
Manufacturer Part Number
1N4130UR
Description
DO213AA/GLASS SURFACE MOUNT 0.5 WATT ZENERS
Manufacturer
Microsemi Corporation
Specifications of 1N4130UR
Pack_quantity
1
Comm_code
85411000
Lead_time
168
Copyright © 2006
3-30-06 REV D
IMPORTANT: For the most current data, consult MICROSEMI’s website:
The 1N4099UR thru 1N4135UR and 1N4614UR thru 1N4627UR series of
0.5 watt glass surface mount DO-213AA Zener voltage regulators provides
a selection from 1.8 to 100 volts in standard 5% tolerances as well as
tighter tolerances identified by different suffix letters on the part number.
These are also available with an internal-metallurgical-bond option by
adding a “-1” suffix (see separate data sheet) including JAN, JANTX, and
JANTXV military qualifications.
Zener products to meet higher and lower power applications.
• Surface mount equivalent to JEDEC registered 1N4099
• Internal metallurgical bond option available by adding a
• DO-7 or DO-35 glass body axial-leaded Zener
• RoHS Compliant devices available by adding “e3” suffix
• Operating and Storage temperature: -65
• Thermal Resistance: 150
• Steady-State Power: 0.5 watts at end cap temperature
• Forward voltage @200 mA: 1.1 volts
• Solder Temperatures: 260
thru 1N4135 and 1N4614 thru 1N4627 series
“-1” suffix (see separate data sheet for part numbers
1N4099UR-1 thru 1N4135UR-1, and 1N4614UR-1 thru
1N4627UR-1 series)
equivalents also available per JEDEC registration (see
separate data sheet for part numbers 1N4099 thru
1N4135 and 1N4614 thru 1N4627 series)
300
board (1 oz Cu) with recommended footprint (see last
page)
T
mounted on FR4 PC board as described for thermal
resistance above (see Figure 2 for derating)
EC
º
< 100
C/W junction to ambient when mounted on FR4 PC
o
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
C or ambient temperature T
MAXIMUM RATINGS
S C O T T S D A L E D I V I S I O N
FEATURES
º
C/W junction to end cap and
º
C for 10 s (max)
DESCRIPTION
Microsemi also offers numerous other
A
< 25
º
C to +175
º
C when
Scottsdale Division
Microsemi
º
C
http://www.microsemi.com
GLASS SURFACE MOUNT 0.5 WATT
MECHANICAL AND PACKAGING
•
•
•
•
•
•
•
•
• CASE: Hermetically sealed glass DO-213AA (SOD80
• FINISH: End caps Tin-Lead (Sn/Pb) or RoHS
• POLARITY: Cathode indicated by band where diode
• MARKING: cathode band only
• TAPE & REEL option: Standard per EIA-481-1-A with
• WEIGHT: 0.04 grams
• See package dimensions on last page
(or MLL4099 thru MLL4135, e3)
(or MLL4614 thru MLL4627, e3)
1N4099UR thru 1N4135UR, e3
1N4614UR thru 1N4627UR, e3
or MLL34) MELF style package
Compliant annealed matte-Tin plating solderable per
MIL-STD-750, method 2026
is to be operated with the banded end positive with
respect to the opposite end for Zener regulation
12 mm tape, 2000 per 7 inch reel or 5000 per 13 inch
reel (add “TR” suffix to part number)
Regulates voltage over a broad operating current and
temperature range
Extensive selection from 1.8 to 100 V
Standard voltage tolerances are plus/minus 5% with
no suffix
Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
Hermetically sealed surface mount package
Nonsensitive to ESD per MIL-STD-750 Method 1020
Minimal capacitance (see Figure 3)
Inherently radiation hard as described in Microsemi
MicroNote 050
APPLICATIONS / BENEFITS
ZENERS
and
APPEARANCE
DO-213AA
Page 1