W83783S_07 WINBOND [Winbond], W83783S_07 Datasheet - Page 35

• Manufacturer Part Number: W83783S_07
• Description: Winbond H/W Monitoring IC
• Manufacturer: WINBOND [Winbond]

7.13 IRQ#/OVT# Property Select ⎯ Index 4Ch
Register Location:
Power on Default Value
Attribute:
Size:
Bit 7: Set to 1 , select pin 9 SMI#/PWMOUT2 as PWM output. Set to 0, select pin 9 as SMI# output.
Bit6: Set to 1, the SMI# output type of temperature sensor 1 is set to Comparator Interrupt mode. Set
Bit 5: Set to 1, the SMI# output type of temperature sensor 1 is set to One-Time interrupt mode. Set to
Bit 4: Reserved. User Defined.
Bit 3: Disable temperature sensor 1 over-temperature (OVT) output if set to 1. Default is 0, enable
Bit 2: Over-temperature polarity. Write 1, OVT# active high. Write 0, OVT# active low. Default is 0.
Bit 1-0: Reserved. User Defined.
to 0, the SMI# output type is set to Interrupt mode (defined by CR [4Ch] Bit 5 ).
0, the SMI# output type of temperature sensor 1 is set to Two-Times interrupt mode.
OVT1 output through pin OVT#.
7
6
4Ch
<7:0> --0000, 0001. Reset by MR.
Read/Write
8 bits
5
4
3
2
1
- 31 -
0
Reserved
Reserved
OVTPOL
DIS_OVT
Reserved
EN_ONE_INTMODE
T1_INTMode
PWM2SEL
Publication Release Date: August 21, 2007
W83783S
Revision 1.0