LM95233_07 NSC [National Semiconductor], LM95233_07 Datasheet - Page 17

• Manufacturer Part Number: LM95233_07
• Description: Dual Remote Diode and Local Temperature Sensor with SMBus Interface and TruTherm Technology
• Manufacturer: NSC [National Semiconductor]

1.12 SERIAL INTERFACE RESET
In the event that the SMBus Master is RESET while the
LM95233 is transmitting on the SMBDAT line, the LM95233
must be returned to a known state in the communication pro-
tocol. This may be done in one of two ways:
(c) Serial Bus Read from a Register with the Internal Command Register preset to desired value.
(a) Serial Bus Write to the internal Command Register followed by a the Data Byte
(d) Serial Bus Write followed by a Repeat Start and Immediate Read
(b) Serial Bus Write to the Internal Command Register
FIGURE 7. SMBus Timing Diagrams
17
1.
When SMBDAT is LOW, the LM95233 SMBus state
machine resets to the SMBus idle state if either SMBDAT
or SMBCLK are held low for more than 35ms (t
Note that according to SMBus specification 2.0 all
devices are to timeout when either the SMBCLK or
SMBDAT lines are held low for 25-35ms. Therefore, to
20206310
20206311
20206312
20206314
www.national.com
TIMEOUT
).