AT25DF021-SSH ATMEL [ATMEL Corporation], AT25DF021-SSH Datasheet - Page 11

• Manufacturer Part Number: AT25DF021-SSH
• Description: One mechanical button switch Three LEDs Four expansion headers
• Manufacturer: ATMEL [ATMEL Corporation]

7 Included code example
7.1 Compiling and running
8 Known Issues
8.1 Light sensor
8.2 USB test points
32156A-AVR-01/11
The example application is based on the Atmel AVR Software Framework found
online
“avr32\applications\uc3-l0_xplained” in the ASF. For documentation, help, and
examples on the drivers used, please see the website.
The code examples that can be found in ASF can be compiled by running make on
the makefile included in the project or by opening the project in IAR™ and compiling
the project within IAR.
The output range on the light sensor is 0V – 3.3V. The ADC reference must therefore
be high enough to match the output range of the light sensor when doing
measurements.
Touching the test points for the USB data lines on the back side of the board while
there is ongoing communication might interrupt the device and cause the device to
stop responding. The kit must be reconnected to start working properly again.
at
http://asf.atmel.no.
The
example
can
be
found
AVR32924
in
the
path