ISD-COB17 WINBOND [Winbond], ISD-COB17 Datasheet - Page 3

• Manufacturer Part Number: ISD-COB17
• Description: The ISD-COB17xxx COB/Demo board
• Manufacturer: WINBOND [Winbond]

To change the Volume, pressing
button once will alter one volume level.
VOL
To Reset the device, pressing
button will bring the device back to its default state.
RESET
To vary the sampling frequency, change the Rosc (R5) to the desired value.
To feed-through (FT) AnaIn signal to output, install jumper at J2, then connect signal to AnaIn terminal.
SPI Operations:
Simply connect the SPI signals to the SPI terminal and start running the program.
For other technical details on the ISD1700 series, please refer to the datasheet.
SCHEMATIC:
September 2006
Rev 2
3/4