LUPA-4000 CYPRESS [Cypress Semiconductor], LUPA-4000 Datasheet - Page 5

• Manufacturer Part Number: LUPA-4000
• Description: 4M Pixel CMOS Image Sensor
• Manufacturer: CYPRESS [Cypress Semiconductor]

1 Preamble
1.1 Overview
This document describes the interfacing and the driving of the LUPA-4000 image
sensor. This 4 mega-pixel CMOS active pixel sensor features synchronous shutter and
a maximal frame-rate of 15fps in full resolution. The readout speed can be boosted by
means of sub sampling and windowed Region Of Interest (ROI) readout. High
dynamic range scenes can be captured using the double and multiple slope
functionality.
The sensor can be used with one or two outputs. Two on chip 10-bit ADC’s can be
used to convert the analog data to a 10-bit digital word stream. The sensor uses a 3-
wire Serial-Parallel (SPI) interface. It is housed in a 127-pin ceramic PGA package.
This datasheet allows the user to develop a camera-system based on the described
timing and interfacing.
1.2 Main features
The main features of the image sensor are identified as:
1.3 Part Number
Name
LUPA-4000-M
CYIL1SM4000AA-GBC (preliminary)
• 2048 x 2048 active pixels (4M pixel resolution).
• 12
• Peak QE x FF of 37.50%.
• Optical format: 24,6 mm x 24,6 mm
• Pixel rate of 66 MHz using a 33 MHz system clock.
• Optical dynamic range: 66 dB (2000:1) in single slope operation and up to 90
• 2 On-chip 10 bit, 33 MSamples/s ADC.
• Full snapshot shutter.
• Random programmable windowing and sub-sampling modes.
• 127-pin PGA package
• Binning (Voltage averaging in X-direction)
• Programmable read out direction (X and Y)
Contact:
Cypress Semiconductor Corporation
LUPA-4000
Data Sheet
technology of FillFactory (US patent No. 6,225,670 and others)).
dB in multiple slope operation.
µ
[e-mail]
m
2
square pixels (based on the high-fill factor active pixel sensor
Document #: 38-05712 Rev.**(Revision 1.2 )
3901 North First Street
Package
127 pin
ceramic PGA
San Jose, CA 95134
Monochrome / color
Monochrome
Page 5 of 49
408-943-2600