PIC12F1840 MICROCHIP [Microchip Technology], PIC12F1840 Datasheet - Page 85

• Manufacturer Part Number: PIC12F1840
• Description: 8-Pin Flash Microcontrollers with nanoWatt XLP Technology
• Manufacturer: MICROCHIP [Microchip Technology]

8.5.3
The PIE2 register contains the interrupt enable bits, as
shown in
REGISTER 8-3:
 2011 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2-0
R/W-0/0
OSFIE
Register
PIE2 REGISTER
OSFIE: Oscillator Fail Interrupt Enable bit
1 = Enables the Oscillator Fail interrupt
0 = Disables the Oscillator Fail interrupt
Unimplemented: Read as ‘0’
C1IE: Comparator C1 Interrupt Enable bit
1 = Enables the Comparator C1 interrupt
0 = Disables the Comparator C1 interrupt
EEIE: EEPROM Write Completion Interrupt Enable bit
1 = Enables the EEPROM Write Completion interrupt
0 = Disables the EEPROM Write Completion interrupt
BCL1IE: MSSP Bus Collision Interrupt Enable bit
1 = Enables the MSSP Bus Collision Interrupt
0 = Disables the MSSP Bus Collision Interrupt
Unimplemented: Read as ‘0’
8-3.
U-0
—
PIE2: PERIPHERAL INTERRUPT ENABLE REGISTER 2
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W-0/0
C1IE
R/W-0/0
EEIE
Preliminary
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
R/W-0/0
BCL1IE
Note:
Bit PEIE of the INTCON register must be
set to enable any peripheral interrupt.
PIC12F/LF1840
U-0
—
U-0
—
DS41441A-page 85
U-0
—
bit 0