Z8932120FSC ZILOG [Zilog, Inc.], Z8932120FSC Datasheet - Page 18

• Manufacturer Part Number: Z8932120FSC
• Description: 16-BIT DIGITAL SIGNAL PROCESSORS
• Manufacturer: ZILOG [Zilog, Inc.]

Z89321/371/391
16-Bit Digital Signal Processors
ADDRESS SPACE
Program Memory. Programs of up to 4 K words can be
masked into internal ROM (OTP for Z89371). Four loca-
tions are dedicated to the vector address for the three in-
terrupts (0FFDH-0FFFH) and the starting address follow-
ing a Reset (0FFCH). Internal ROM is mapped from 0000H
to 0FFFH, and the highest location for program is 0FFBH.
A 64 K word External Program Memory Space is available
on the Z89391. The vector addresses for the Z89391 re-
side at FFFCH-FFFFH (Figure 15).
Internal Data RAM. The Z89321, 371 and 391 all have in-
ternal 512 x 16-bit word data RAM organized as two banks
of 256 x 16-bit words each: RAM0 and RAM1. Each data
RAM bank is addressed by three pointers: Pn:0 (n = 0-2)
for RAM0 and Pn:1 (n = 0-2) for RAM1. The RAM address-
es for RAM0 and RAM1 are arranged from 0-255 and 256-
511, respectively. The address pointers, which may be
written to, or read from, are 8-bit registers connected to the
18
PROGRAM
PROGRAM
ADDRESS
DATA
CLOCK
512 words
Data Memory
Not Used
PASET
DRAM1
DRAM0
Figure 14. External Program Memory Port Timing
On-Chip Memory
Valid
FFFF
0100
0000
01FF
00FF
PDSET
TCY
Valid
4 Kwords
Figure 15. Memory Map
P R E L I M I N A R Y
INT0-INT2 Vect.
RESET Vector
PDHOLD
Not Used
lower byte of the internal 16-bit D-Bus and are used to per-
form modulo addressing.
Three addressing modes are available to access the Data
RAM: register indirect, direct addressing, and short form
direct. The contents of the RAM can be read to, or written
from, in one machine cycle per word, without disturbing
any internal registers or status other than the RAM ad-
dress pointer used for each RAM. The contents of each
RAM can be loaded simultaneously into the X and Y inputs
of the multiplier.
Registers. The Z89321 has 19 internal registers and up to
an additional eight external registers. The external regis-
ters are user-definable for peripherals, such as A/D or D/A,
or to DMA, or other addressing peripherals. Both external
and internal registers are accessed in one machine cycle.
Valid
Program Memory
FFFF
FFFC
0000
0FFF
0FFC
Valid
Or
Off-Chip Memory
INT0-INT2 Vect.
RESET Vector
Valid
64 Kwords
DS97DSP0100
Valid
Zilog