LSIR3331 LIGITEK [LIGITEK electronics co., ltd.], LSIR3331 Datasheet - Page 5

• Manufacturer Part Number: LSIR3331
• Description: INFRARED EMITTING DIODES
• Manufacturer: LIGITEK [LIGITEK electronics co., ltd.]

PART NO.
ESD(Electrostatic Discharge):
2.Once the package is opened, the products should be used within a week.
3.If opened more than one week in an atmosphere 5 ℃ ~ 35 ℃ ,RH<60%,
(A) Recommended circuit.
(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
1.The operation of Temperatures and RH are : 5 ℃ ~35 ℃ ,RH<60%.
Storage time:
Cleaning:
Drive Method:
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series
with the LED.
Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd
current should not be allowed to change by more than 40 % of its desired value.
LED is a current operated device, and therefore, require some kind of current limiting incorporated into
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life, we suggest our customers to use our products within
a year(from production date).
they should be treated at 60 ℃± 5 ℃ fo r 15hrs.
LSIR3331
Circuit model A
LED
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Circuit model B
LED
Page 4/6