MBM29F016A-12 FUJITSU [Fujitsu Component Limited.], MBM29F016A-12 Datasheet - Page 20

• Manufacturer Part Number: MBM29F016A-12
• Description: 16M (2M X 8) BIT
• Manufacturer: FUJITSU [Fujitsu Component Limited.]

20
MBM29F016A
Notes: 1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, inputs may negative
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING RANGES
Ambient Temperature (T
V
Operating ranges define those limits between which the functionality of the device is guaranteed.
MBM29F016A-70............................................................................................ +4.75 V to +5.25 V
MBM29F016A-90/-12...................................................................................... +4.50 V to +5.50 V
CC
Storage Temperature ........................................................................................–55°C to +125°C
Ambient Temperature with Power Applied ........................................................–40°C to +85°C
Voltage with Respect to Ground All pins except A
V
A
2. Minimum DC input voltage on A
Supply Voltages
CC
9
, OE, and RESET (Note 2) ............................................................................–2.0 V to +13.5 V
overshoot V
+0.5 V. During voltage transitions, outputs may positive overshoot to V
and RESET pins may negative overshoot V
voltage on A
difference between input voltage and power supply. (V
(Note 1) ......................................................................................................–2.0 V to +7.0 V
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
SS
9
, OE, and RESET are +13.0 V which may overshoot to 14.0 V for periods up to 20 ns. Voltage
to –2.0 V for periods of up to 20 ns. Maximum DC voltage on output and I/O pins is V
A
) ................................................................................ –40°C to +85°C
-70/-90/-12
9
, OE, and RESET pins are –0.5 V. During voltage transitions, A
SS
to –2.0 V for periods of up to 20 ns. Maximum DC input
9
, OE, and RESET (Note 1).–2.0 V to +7.0 V
IN
– V
CC
) do not exceed 9 V.
CC
+2.0 V for periods up to 20 ns.
9
, OE,
CC