LTM201M2-L01 Samsung, LTM201M2-L01 Datasheet - Page 42

• Manufacturer Part Number: LTM201M2-L01
• Description: Display Module
• Manufacturer: Samsung

MODEL
11.2 Storage
11.3 Operation
11.4 Operation Condition Guide
(a) Do not leave the Module in high temperature, and high humidity for a long time.
(b) Do not store the TFT-LCD Module in direct sunlight.
(c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
(a) Do not connect or disconnect the Module in the "Power On" condition.
(b) Power supply should always be turned on/off by the item 6.3
(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
(d) The cable between the back light connector and its inverter power supply should
(a) The LCD product should be operated under normal conditions.
(b) If the product will be used in extreme conditions such as high temperature,
It is highly recommended to store the Module with temperature from 0 to 35℃
and relative humidity of less than 70%.
fluorescent light in storing.
interference should be done by system manufacturers. Grounding and shielding
methods may be important to minimize the interference.
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(CCFT) and
may require higher startup voltage(Vs).
"Power on/off sequence"
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.
Normal condition is defined as below;
- Temperature : 20±15℃
- Humidity : 65±20%
- Display pattern : continually changing pattern (Not stationary)
LTM201M2-L01
Doc. No
06-D00-S-060928
Approval Specification
Approval Specification
Page
42/43