AS188-92LF SKYWORKS [Skyworks Solutions Inc.], AS188-92LF Datasheet - Page 3

• Manufacturer Part Number: AS188-92LF
• Description: PHEMT GaAs IC High-Linearity Positive Control SPDT Switch 300 kHz-2 GHz
• Manufacturer: SKYWORKS [Skyworks Solutions Inc.]

Absolute Maximum Ratings
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
Tape and Reel Information
Refer to the
Tape and Reel Package Orientation”
Recommended Solder Reflow Profiles
Refer to the
Application Note.
RF input power
Control voltage
Operating temperature
Storage temperature
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Characteristic
“Recommended Solder Reflow Profile”
“Discrete Devices and IC Switch/Attenuators
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200178 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006
Application Note.
6 W max. > 900 MHz
-65 °C to +150 °C
-40 °C to +85 °C
0/7 V control
-0.2 V, +7 V
Value
Truth Table
All other conditions not recommended.
V
SC-70 6-Lead
HIGH
= 3 to 5 V (V
± 0.002 (0.005 mm) 0.037 (0.95 mm)
V
0.002 (0.005 mm)
± 0.004 (0.10 mm)
V
HIGH
0.035 (0.90 mm)
0
1
± 0.008 (0.20 mm)
0.079 (2.00 mm)
± 0.008 (0.20 mm)
Pin 1 Indicator
0.087 (2.20 mm)
S
= V
HIGH
± 0.2 V).
± 0.006 (0.15 mm)
V
HIGH
V
0
2
DATA SHEET • AS188-92, AS188-92LF
(0.14 mm)
(0.04 mm)
± 0.0015
0.0055
Insertion loss
Isolation
J
± 0.004 (0.10 mm)
1
0.049 (1.25 mm)
–J
0.009 (0.23 mm)
± 0.006 (0.15 mm)
0.0256 (0.65 mm)
2
± 0.004 (0.10 mm)
0.010 (0.25 mm)
0.008 (0.20 mm)
Ref
BSC
Insertion loss
Isolation
J
1
–J
3
3