pva100p6rq Banner Engineering Corp., pva100p6rq Datasheet - Page 3

• Manufacturer Part Number: pva100p6rq
• Description: Pva Series Parts Verification Array Light Screen For Error Proofing Of Bin-picking Operations
• Manufacturer: Banner Engineering Corp.

Supply Voltage and Current
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Status Indicators
Construction
Environmental Rating
Connections
Operating Temperature
Maximum Off-axis
Misalignment
Certifications
Supply Protection Circuitry
Sensing Range
Sensing Height
Beam Spacing
Sensing Resolution
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
•
Minneapolis, MN U.S.A.
Emitter:
Receiver: One green LED to indicate power ON/OFF
Emitter
and
receiver: green (see page 7).
Emitter:
Receiver: 4-conductor PVC-jacketed 2 m (6.5') cable which is either unterminated or terminated with a 4-
Receivers have one solid-state dc output, programmable for light or dark operate:
Protected against false pulse at power-up and continuous overload or short circuit of outputs
Sensor Size
Black painted aluminum housing; acrylic lenses; Valox
switch cover; stainless steel mounting brackets and hardware
NEMA 2; IEC IP62
0° to +50°C (+32° to 122°F)
See Figure 4, page 5.
12 to 30V dc (10% maximum ripple) at less than 62 mA for the emitter and 50 mA for the receiver
(exclusive of load)
Protected against reverse polarity
2 m (6.5') with 2x excess gain remaining
100 mm (3.9"), 225 mm (8.9"), 300 mm (11.8"), or 375 mm (14.8"), depending on emitter and receiver models
25.0 mm (0.98")
35 mm (1.4") minimum diameter
150 mA maximum
Off-state leakage current less than 2 microamps
On-state saturation voltage less than 1V dc at 10 mA and less than 1.5V dc at 100 mA
100 mm
225 mm
300 mm
375 mm
Models PVA...N6R have current sinking (NPN) open-collector transistor
Models PVA...P6R have current sourcing (PNP) open-collector transistor
One green LED to indicate power ON/OFF
One red LED to indicate frequency selected
One yellow LED to indicate output state
Both have two highly visible “job lights” which are turned ON and OFF by applying an external
signal to the white wire (see page 6). The job lights may be programmed for steady or flashing
3-conductor PVC-jacketed 2 m (6.5') cable which is either unterminated or terminated with a 4-
pin Euro-style quick-disconnect connector, depending on model (see model selection chart,
page 2). Cable diameter is 3.3 mm (0.13").
pin Euro-style quick-disconnect connector, depending on model (see model selection chart,
page 2). Cable diameter is 3.3 mm (0.13").
Parts Verfication Array Specifications
Standard
20 ms
40 ms
52 ms
64 ms
With Crosstalk from Adjacent Units
PVA Series Parts Verification Array
30 ms
60 ms
78 ms
96 ms
®
end caps; thermoplastic elastomer programming
P/N 52088 rev. D
3