MP7720DS MPS [Monolithic Power Systems], MP7720DS Datasheet - Page 6

• Manufacturer Part Number: MP7720DS
• Description: 20W Stereo Class D Single Ended Audio Amplifier
• Manufacturer: MPS [Monolithic Power Systems]

QUICK START GUIDE
This board is set up from the factory for 24V operation. To use with a 12V power supply adjust the
components as specified in the 12V operation Section 3 below. For more information, consult the
MP7720 datasheet.
NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications.
Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS
products into any application. MPS will not assume any legal responsibility for any said applications.
EV0030 Rev. 1.6
6/13/2005
1. Power Requirements
2. Setup Condition for 24V Operation
3. 12V Operation Modifications
4. Music Turn-On Sequence
5. Music Turn-Off Sequence
a. Power supply: 24V, 6A maximum.
b. 0V to 1V
c. Speaker: 4Ω or 8Ω.
a. Connect the outputs to the external speakers.
b. Adjust the power supply to 24V (do not turn on).
c. Connect the power supply to the V
d. Set the enable switch to the DISABLE position.
e. Connect the audio input signal source to the amplifier inputs (IN1, IN2).
f.
a. Change C11 and C12 to 2.2nF components. Change R13 and R14 to 2kΩ (consult the
b. Adjust the power supply to 12V (do not turn on).
c. Use same procedure for turn on as specified in Section 2.
a. Set the enable switch to the ENABLE position.
b. Audio should be heard from the speaker(s).
a. Set the enable switch to the DISABLE position.
TM
Turn on the power supply to apply power to the board.
MP7720 datasheet for more details).
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
RMS
(max) audio signal source.
EV0030 – 20W STEREO CLASS D SINGLE ENDED AUDIO AMPLIFIER
© 2005 MPS. All Rights Reserved.
www.MonolithicPower.com
DD
terminals.
EVALUATION BOARD
6