g6k-2f-rf-s Omron Corporation, g6k-2f-rf-s Datasheet - Page 2

• Manufacturer Part Number: g6k-2f-rf-s
• Description: High Frequency Relay
• Manufacturer: Omron Corporation

■ Coil Data
Note: 1. The values in the above list were obtained at ambient temperature of 23°C with the tolerance of rated current and coil resistance ±10%
■ High Frequency Characteristics (Initial)
Note: Measured with 50 Ω and V.S.W.R.
■ Characteristics
2
Rated voltage
3 VDC
4.5 VDC
5 VDC
6 VDC
9 VDC
12 VDC
24 VDC
Isolation
Insertion loss
V.S.W.R. return loss
Maximum transmission capacity
Maximum switching capacity
Dielectric strength
Insulation resistance
Operation (set) time
Release (reset) time
Shock resistance
Vibration resistance
Mechanical life expectancy
Electrical life expectancy
Operating ambient temperature
Operating ambient humidity
Weight
2. The maximum voltage is the highest voltage that can be applied to the relay coil instantaneously and it is on the ambient temperature
3. Other items are measured at 23°C
under the operating conditions
High Frequency Relay
Rated current
33.0 mA
23.2 mA
21.1 mA
17.6 mA
11.3 mA
9.1 mA
4.6 mA
Between open contacts
Between contact sets
Between contacts and coil 750 VAC, 50/60 Hz for 1 minute
Contacts and ground
At 20°C
At 20°C
Malfunction
Destruction
Malfunction
Destruction
Resistive load
20 dB min. at 1 GHz between continuous contact
30 dB min. at 1 GHz between non-continuous contact
0.2 dB max. at 1 GHz
1.2 max. at 1 GHz
3 W
1 W
Coil resistance
91 Ω
194 Ω
237 Ω
341 Ω
795 Ω
1,315 Ω
5,220 Ω
≤
G6K-RF
1.2
750 VAC, 50/60 Hz for 1 minute
750 VAC, 50/60 Hz for 1 minute
500 VAC, 50/60 Hz for 1 minute
1,000 MΩ min. at 500 VDC
3 ms max.
3 ms max.
750 m/s
1,000 m/s
0.1 ms min., 10 Hz to 55 Hz (3.3 mm double amplitude)
2 hours, 55 Hz to 500 Hz (5 mm double amplitude)
50 million operations min. at 36,000 ops/hour
100,000 operations min. (0.3 A, 125 VAC or 1 A, 30 VDC) at 1,800 ops/hour
-40° to 70°C with no icing
5% to 85% RH
Approx. 0.95 g
Must operate
voltage
80% max. of
rated voltage
(75% max. of
rated set/reset
voltage for
latching mod-
els)
2
(approx. 75G)
2
(approx. 100G)
Must release
voltage
10% min. of
rated voltage
Rated power
consumption
Approx. 100 mW
Maximum voltage
150% of rated
voltage