evqp0e07k Panasonic Corporation of North America, evqp0e07k Datasheet - Page 4

• Manufacturer Part Number: evqp0e07k
• Description: Light Touch Switch
• Manufacturer: Panasonic Corporation of North America

Classification
Part Name
9. Operation life
10. Precaution
11. Notes
9.1 Allowable operating frequency
9.2 Allowable operating speed
9.3
10.1 Soldering condition
11.1 Measuring condition : Unless otherwise specified, these standard range of atmospheric
11.2 Recommendable tip for mechanical test :
11.3 Precaution for handing
After test
Preheat temperature
Preheat time
Height of flux
Temperature of soldering
Time of immersion
Soldering time
Printed wiring board
LIGHT TOUCH SWITCH
Contact resistance : 1000 (mΩ) max.
Operating force
･Please be cautions not to apply over specified static load or shock to actuator of the switch.
･Re-soldering by soldering iron shall be allowed under 280℃ max. 3 sec. max. 1 time.
･Storage under high temperature, high humidity and corrosive gas should be avoided.
･After mount to P.W.B., a switch has be stored not to apply over specified load.
･Please be careful not to clean switches with water and solvent.
Mechanical
Soldering iron for re-soldering have to be 20W max.
Especially, when long period preservation is needed, do not open the carton.
Electrical
Item
Item
REFERENCE SPECIFICATION
: within ±30% of initial force
The number of operations
conditions for measuring and testing shall be as follows.
Standard temperature : 20℃
Standard humidity
When criteria have no doubts, test is done at temperature of 5℃
to 35℃ and humidity of 45%RH to 85%RH.
The tip shown in the right figure
is the recommended dimension.
Tip point shall be kept vertically
at center-line of the switch.
5, 000, 000 min.
120℃ max. (temperature of soldering surface of P.W.B.)
60s max.
1/2 max. of P.W.B. thickness
260℃ max.
Within 5s
Within 2 times (Bringing down the heat after first soldering)
Single sided copper-clad laminates
5, 000, 000 min.
Panasonic Electronic Devices Co., Ltd.
300 times/min max.
1 ~ 5 mm/s
Part №
: 65%RH
EVQ P0E 07
Condition
DC 5 V 1mA 2 ~ 3 operations/s
TTP
Displacement of actuator
K
Issue №
5－4