em91415 ELAN Microelectronics Corp, em91415 Datasheet - Page 6

• Manufacturer Part Number: em91415
• Description: Tone/pulse Switchable Dialer With Lcd Interface And Dual-tone Melody Generator Tone/pulse Switchable Dialer With Lcd Interface And Dual-tone Melody Generator
• Manufacturer: ELAN Microelectronics Corp

* This specification are subject to be changed without notice.
Redialing:
Repertory memory
Storing of 13 sets memory types
Dialing (after memory dialed out, the content of LNB is keeping to current data)
Pause (P) key operation
The Pause (P) key is designed to support pause operation in dialing duration. “P” key can be stored in memory
and it will occupy one digital position.
After normal dialing, directly keying F key (or On-Off hook once) and keying RD key on keyboard. The
numbers that are stored into LNB memory will be dialed output.
The EM91415 series incorporated several sets repertory memory and each one can store number up to 16 digits.
In memory storing, if stored numbers are more than 16 digits that only the previous 16 digits can be stored
into specific memory. Otherwise, these numbers can be stored entirely. After memory dialed out, the content
of LNB is keeping to current data.
Direct (one-touch) operation
Off-hook (or turn on HF function), push (ST, d1, d2, .. , dn [ST], EMn or M1~M10 (ROW5 optioned).) The
numbers d1, d2, .. , dn will be stored into memory location “EMn” or Mn. The “EMn” expressed emergency
memory EM1 to EM3. The Mn expressed memory M1~M10.
Indirect (two-touch) operation
Off-hook (or turn on HF function), push (ST, d1, d2, .. , dn, ST, n.) The numbers d1, d2, .. , dn will be stored
into memory location “n”. The “n” expressed digital key from 0 to 9.
Direct (one-touch) memory operation
• To select Pulse or Tone mode.
• Off-hook (or Turn on HF function), push Mn (or EMn) key. The numbers that are stored in direct memory
Indirect (two-touch) memory operation
• To select Pulse or Tone mode.
• Off-hook (or Turn on HF function), push A, n key. The numbers that are stored in indirect memory location
• To select Pulse or Tone mode.
• Off-hook (or turn on HF function), push (d1, d2, .. , dn, RD/P, k1, k2, .. , kn.) These numbers will be dialed
location “Mn (or EMn)” will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital
number from 1~10 decided by dialers’ memory sets.
“n” will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital key from 0 to 9.
out as following sequence:
d1, d2, .. , dn, Tp, k1, k2, .. , kn.
TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
AND DUAL-TONE MELODY GENERATOR
EM91415 SERIES
10.1.1997
6