AD6315Q ANACHIP [Anachip Corp], AD6315Q Datasheet - Page 8

• Manufacturer Part Number: AD6315Q
• Description: 1/4- to 1/12 Duty VFD Controller/Driver
• Manufacturer: ANACHIP [Anachip Corp]

(Ⅰ) Display mode setting commands
(Ⅱ) Data setting commands
Note: For power application, the normal operation and address increment modes are set.
Anachip Corp.
www.anachip.com.tw
1/4- to 1/12 Duty VFD Controller/Driver
These commands initialize the AD6315 and select the number of segments and the number of grids
(1/4- to 1/12- duty, 16 segments to 24 segments).
When these commands are executed, the display is forcibly turned off, and key scanning is also stopped.
To resume display, the display command “ON” must be executed. If the same mode is selected, however,
nothing happens.
Note: On power application, the 12-digit, 16-segment mode is selected.
These commands set data write and data read modes.
0
MSB
1
Don't care
MSB
0
b3
0
Don't care
b2
b1
LSB
b0
Daat write and read mode settings
00: Write data to display memory
01: Write data to LED port
10: Read key data
11: Don't card
Address increment mode settings (Display memory)
0: Increments address after data has been written
1: Fixes address.
Test mode settings
0: Normal operation
1: Test mode
b2
8/16
b1
LSB
b0
Display mode settings
0000: 4digits 24segments
0001: 5digits 23segments
0010: 6digits 22segments
0011: 7digits 21segments
0100: 8digits 20segments
0101: 9digits 19segments
0110: 10digits 18segments
0111: 11digits 17segments
1xxx : 12digits 16segments
AD6315
Rev. A5 Dec 29, 2003