SB1118C-0002 STANLEY [STANLEY ELECTRIC CO.,LTD.], SB1118C-0002 Datasheet - Page 11

• Manufacturer Part Number: SB1118C-0002
• Description: Single Color 1608 (h=0.35 mm) Type
• Manufacturer: STANLEY [STANLEY ELECTRIC CO.,LTD.]

2009.3.30
Reflow Soldering Conditions
Manual Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface.
2) Total times of reflow soldering process shall be no more than 2 times.
3) Temperature fluctuation to the LED during the pre-heating process shall be minimized.
Please set the temperature so as to avoid exceeding this range.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to normal temperature after the first reflow) in order to prevent the
LED from absorbing moisture.
(6℃ maximum)
Iron tip temp.
Soldering time and frequency
350 ℃
3 s
1 time
(MAX.)
(MAX.)
(MAX.)
SB1118C-0002
Single Color 1608 (h=0.35 mm) Type
Page 11