PD4W09-12_06 SKYWORKS [Skyworks Solutions Inc.], PD4W09-12_06 Datasheet - Page 3

• Manufacturer Part Number: PD4W09-12_06
• Manufacturer: SKYWORKS [Skyworks Solutions Inc.]

Absolute Maximum Ratings
1. When used as a power divider with a 2.0:1 maximum VSWR on all ports.
2. When used as a power combiner with a 2.0:1 maximum VSWR on all ports.
Performance is guaranteed only under the conditions listed in the specifications table and is
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
Recommended Board Layout
Material is 10 mil FR4.
Input power
Input power
Operating temperature
Storage temperature
0.028
0.018 Typ.
Typ.
(1)
(2)
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Characteristic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200244 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006
0.039 Typ.
-65 °C to +150 °C
-40 °C to +85 °C
1.5 W CW
0.375 CW
Value
0.170
Via 2 Places
0.021 Typ.
0.020 Dia.
SOIC-8
Recommended Solder Reflow Profiles
Refer to the
Application Note.
Tape and Reel Information
Refer to the
Tape and Reel Package Orientation”
(1.73 mm) Max.
0.010 (0.25 mm)
0.004 (0.10 mm)
0.197 (5.00 mm)
0.189 (4.80 mm)
Indicator
0.068
Pin 1
“Discrete Devices and IC Switch/Attenuators
“Recommended Solder Reflow Profile”
Pin 1
Pin 8
DATA SHEET • PD4W09-12, PD4W09-12LF
(1.24 mm)
(0.41 mm)
0.049
0.016
0.010 (0.25 mm)
0.007 (0.17 mm)
0.020 (0.51 mm) Max.
0.050 (1.27 mm) BSC
0.244 (6.20 mm)
0.228 (5.80 mm)
Application Note.
0.158 (4.00 mm)
0.150 (3.80 mm)
(0.41 mm) x
45˚ Chamfer
0.016 Max.
Max.
8˚
3